Power On/Off
♦Power On/Off
Use a 100-240V AC power source. The « » button on the panel and the remote control can be used to switch between on and standby states.
On the panel, press and hold the Power button for 5 seconds to turn off the unit.
The display has the Power On/Off switch located on its back. Press the O end to turn off the product and the I end to turn it on.
♦Automatic Standby Mode
On the main Android interface, regardless of whether there is an input signal or not, the product will not enter standby mode.
On the main interface other than Android, if there is no input signal for 30 minutes, the product will automatically enter standby mode (depending on the settings).
♦Save Before Power Off
Before powering off, the product will save the picture and sound settings. These settings will be used when restarted.
♦OPS ON/OFF
If the product has the OPS module installed and is on the OPS signal source, the OPS module will start automatically. Otherwise, start it manually.
Before turning off the product, first use the touch function or mouse to deactivate the OPS module from the Home menu. The standby button on the panel or remote control can be used to turn off the product only after the OPS module has been completely turned off. Pressing the standby button or directly disconnecting the power source without turning off the OPS module is not allowed, as it will cause damage.
When the OPS module enters the off state and no operation is performed on the PC for a long time, this product will enter standby mode. To use the module, simply restart the product.
Note: The OPS module is optional.
Instructions for Panel Buttons
1. Indicator light, remote control receiver, and light sensor.
2. Power.
3. Home screen.
4. Back and touch unlock.
5. Settings.
6. Vol-
7. Vol+
8. Position of the plastic mounting bracket for the Wi-Fi antenna.
9. Power On/Off switch