Regional Code
The SET 2 CODE function should not be used in Europe; otherwise, there may be dialing issues. Press the key (8) to exit.
- With the handset on-hook, press the MENU key (9) and then the ▲ key. The LCD screen (1) will display SET 2 CODE. Press the MENU key (9) again. The LCD screen (1) will display CODE ------, and the first "-" will blink.
- Press the ▲ or ▼ keys (7 and 10) to edit the blinking code.
- Press the MENU key (9) to confirm and proceed to the next code.
- Repeat the above steps to configure the other codes.
L.DIST Access
The SET 3 PCODE function should not be used in Europe; otherwise, there may be dialing issues. Press the key (8) to exit.
- With the handset on-hook, press the MENU key (9) and then the ▲ key twice. The LCD screen (1) will display MENU 3 LCODE. Press the MENU key (9) again. The LCD screen (1) will display ---------------0 or the preset codes. Press the key (8) to delete it.
- Enter the long-distance codes using the numeric keys, up to 16 digits.
- Press the MENU key (9) to confirm and exit.
PABX Code:
A PABX is a private telephone system for businesses. It manages internal and external calls, offering functions like call forwarding and voicemail. Press the key (8) to exit.
- With the handset on-hook, press and hold the key
(8) for 3 seconds to configure the PABX code. The LCD screen (1) will display PCODE – and the “-” will blink.
- Press the ▲ or ▼ key to define the PABX code from 0 to 9 or -.
- If you select “-”, it means there is no PABX code defined.
- Press the MENU key (9) to confirm and exit.
R (FLASH) Key Configuration:
If you want to configure the timing for the R key (11):
At 100ms:
- With the handset on-hook, press the MENU key (9) and press the ▲ key four times. The LCD screen will display SET 5 FLASH. Press the MENU key (9) again. The screen will display FLASH 100.
At 300ms:
- With the handset on-hook, press the MENU key (9) and press the ▲ key four times. The LCD screen will display SET 5 FLASH. Press the MENU key (9) again. The screen will display FLASH 100.
- Press the ▲ or ▼ keys to edit the flash time to 100, 300, 600, or 1000ms.
- Press the MENU key (9) to confirm.
Default value: 100ms (Spain).
Note: If you press the key (8) or do not perform any operation within 16 seconds, you will exit the configuration mode.
PAUSE Function (for offices with PABX):
The PAUSE function is used when calling from phones in offices with PBX systems.
After dialing the exit number (such as "0" or "9"), add a pause so the external line connects before dialing the full number. This way, the phone handles the wait automatically.
When dialing a number from a PABX extension, first press the PABX number (usually "0" or "9"), then press the ALARM/P (15) key, followed by the desired number.
To make a new call, simply press the key (12); there's no need to redial the PABX number or press the ALARM/P (15) key again.